Share your favorites on Show & Tell

1870's Pure Patterned Zinc & Fancy Nail Barrel Stave Trunk

In Furniture > Trunks > Show & Tell.
Trunks504 of 25781870's Tooled Leather, strap and dowel, Barrel Stave Trunk 1880’s Saratoga grade antique trunk
13
Love it
0
Like it

jscott0363jscott0363 loves this.
KathyKayKathyKay loves this.
Vynil33rpmVynil33rpm loves this.
TylulaTylula loves this.
greendoggreendog loves this.
EJW-54EJW-54 loves this.
racer4fourracer4four loves this.
fortapachefortapache loves this.
officialfuelofficialfuel loves this.
blunderbuss2blunderbuss2 loves this.
ToyrebelToyrebel loves this.
lisalisa loves this.
trunkmantrunkman loves this.
See 11 more
Add to collection

    Please create an account, or Log in here

    If you don't have an account, create one here.


    Create a Show & TellReport as inappropriate


    Posted 3 years ago

    Im4anythin…
    (91 items)

    I have been away for a while, and then right back at it.... pick this one up yesterday, 1870's barrel stave with original handles great overall exterior condition, as far as dings and dents are concerned. Lots of nifty nail work on this one. Extra wide oak slats at 3" wide verses the norm. with nail work on extra metal slat end covers. It is nice to see a little more elaborate pure zinc trunk in a dome top format, most I have seen are squarish or mild dome top & fairly plain overall. No tray in this one and only partial lid compartments. No makers name. Measures 31" long 19" deep and 27" tall. This one is very similar to the one I have listed here with the title "Early 1870's High End Fancy Nail & Leather Barrel Stave Trunk" .

    logo
    Trunks
    See all
    Rare Vintage Louis Vuitton Custom Clear Acrylic LV Monogram Mot Suitcase Trunk
    Rare Vintage Louis Vuitton Custom C...
    $4,250
    Antique Trunk Hardware-Leather Handles,Ends and Nails for Trunks & Chests-New--U
    Antique Trunk Hardware-Leather Hand...
    $27
    1900s ANTIQUE GIBRALTARIZED STEAMER TRUNK WARDROBE TRUNK CUSHION TOP HARTMANN
    1900s ANTIQUE GIBRALTARIZED STEAMER...
    $350
    A RARE DECORATED 19TH C PA MINIATURE BLANKET CHEST IN ORIGINAL FANCY GRAIN PAINT
    A RARE DECORATED 19TH C PA MINIATUR...
    $115
    logo
    Rare Vintage Louis Vuitton Custom Clear Acrylic LV Monogram Mot Suitcase Trunk
    Rare Vintage Louis Vuitton Custom C...
    $4,250
    See all

    Comments

    1. trunkman trunkman, 3 years ago
      It’s a lovely example of a zinc trunk... love the big slats! Another great find!!
    2. greendog greendog, 3 years ago
      very nice, are you sure its a zinc clad ?
    3. Im4anythingOld, 3 years ago
      Thanks trunkman!!
    4. Im4anythingOld, 3 years ago
      Thanks Brian (greendog) And in answer Yes zinc. It is non magnetic , thus patterned zinc, as per Jim HMS as well.
    5. Im4anythingOld, 3 years ago
      Thanks for the loves Toyrebel & lisalisa
    6. greendog greendog, 3 years ago
      OK, I was confused because, pure zinc and zinc cladded are two different things, pure zinc being non magnetic and zinc cladded, zinc over metal would be magnetic.
    7. Im4anythingOld, 3 years ago
      Hi Brian, I didn't know that there was a distinction such as that. I was just using clad in the sense of one cover over another. I will correct that and put pure zinc. Thanks again my friend for some new tidbits of knowledge for the old melon's memory banks...lol
    8. greendog greendog, 3 years ago
      I was just trying to be clear, Jim told me that pure zinc was probably before 1880 but wasn't used for long because it was expensive to make, they also used zinc clad or coated metal for a while, anyway a very nice trunk, greendog.
    9. Mike78, 3 years ago
      Beautiful trunk.
    10. Im4anythingOld, 3 years ago
      Thanks...
      Tylula
      greendog
      EJW-54
      racer4four
      fortapache
      officialfuel
      blunderbuss
      for the loves very much appreciated.
    11. Im4anythingOld, 3 years ago
      Thanks Mike78 it is nice to find some unusual out of the norm item with some age and for the age in excellent condition regardless of a few defects in this case the lock but certainly not the end of the world when it comes to trunks.........Had to drive 3 hrs one way to get it but worth every minute of it to me. overall all, the long trips works out in the wash in the end and quite frankly one would have a very hard time assembling a descent collection if you were to rely solely on the trunks being offered by the public within an hours radius..unless your population is 10 million. Well it is for me anyway living in the middle of no where. Thanks again!
    12. Drill Drill, 3 years ago
      http://patentimages.storage.googleapis.com/pages/US187267-0.png
      I wonder if this is the machine that made those slat clamps?

      https://patentimages.storage.googleapis.com/pages/USD8306-0.png
      patent for the metal pattern.Hope this helps
    13. Im4anythingOld, 3 years ago
      Thanks Vynil33rpm much appreciated!
    14. Im4anythingOld, 3 years ago
      Again Drill!! Great as always, read, saved and stored!! Thanks so much for the effort and assistance!! All your help with others helps keep yourself sharp doesn't it! lol
    15. Im4anythingOld, 3 years ago
      Drill could very well be that machine as the indent is for sure a tear drop style. Other patents you have posted for me are either round or oval. Thanks!
    16. Im4anythingOld, 3 years ago
      Thanks for the love Vynil33rpm !!
    17. Im4anythingOld, 3 years ago
      Thanks so much for the love!! jscott0363 & KathyKay

    Want to post a comment?

    Create an account or login in order to post a comment.